How Do NFC Review Cards Work?
An NFC review card holds a small chip with your review link. A customer taps a phone on it and the page opens. See how it works and what can go wrong.
By Alan James, Founder, Smart Review Stand · Published · 9 min read
Dana, a week ago
Example“Quick to tap, and they fixed my order without any fuss.”
Reply from the owner
Thank you, Dana. We are glad it worked. See you next week.
An NFC review card contains a small chip that stores one web link. When a customer holds a phone close to the card, the phone reads the link and offers to open it. The link leads to your review page. There is no app to install, no battery in the card and nothing to pair. From the customer's side the whole thing takes a few seconds: tap, open, rate. This guide explains what is inside the card, what the phone does, what the customer sees, and where the process can fail.
What is inside an NFC review card?
Two parts, sealed inside plastic or a stand: a chip and an antenna.
- The chip is tiny and stores a small amount of data. For a review card, that data is a web address.
- The antenna is a thin coil around the chip. It picks up energy from a phone held close by and uses it to send the stored data back.
The card has no battery and no power of its own. It does nothing until a phone comes within a few centimeters. Then the phone's own NFC field powers the chip for a moment, the chip answers with its link, and the exchange is over.
NFC stands for near field communication. It is the same family of technology behind contactless payment cards, though a review card is far simpler. It holds a link and nothing else.
How does the phone read it?
The link on the card is stored in a standard format called NDEF. Android's developer guide to NFC basics describes it: NDEF is the common format phones use to read small pieces of data, such as a web address, from an NFC tag.
Because the format is standard, the phone knows what to do without any extra software. It reads the tag, sees a web link, and offers to open it in the browser.
Two conditions apply on Android. The same guide says Android looks for NFC tags only while the screen is unlocked, and NFC has to be switched on in the phone's settings. A locked phone will not react to the card.
What does the customer do?
Very little, which is the point.
- Unlock the phone.
- Hold the top of the phone close to the card, within a few centimeters.
- A prompt appears with a link. Tap it.
- The review page opens in the browser.
The reading spot differs by phone. On an iPhone it is near the top edge. On many Android phones it is on the back, around the middle or near the camera. A customer who waves the bottom of the phone at the card will get nothing. A short line on the card, such as "hold the top of your phone here," removes most of the confusion.
Which phones can read the card?
Most phones in use today.
- iPhone XS and newer read the card without any setup.
- Most Android phones made since 2015 read it too, when NFC is switched on.
On a few phones NFC is off by default, and some budget models have no NFC at all. That is why every well-made review card also carries a printed QR code. A customer whose phone does not react simply points the camera at the code and reaches the same page. Our comparison of NFC and QR codes for reviews explains how each covers the other's gaps.
What happens on the phone after the tap?
The phone shows a prompt before anything opens. On an iPhone it is a notification at the top of the screen. On Android the behavior depends on the version. Android's guide notes that beginning with Android 17, scanning a tag that holds a web link shows a prompt to open the link.
This prompt is a safety step, and a good one. The customer sees the address before going anywhere. Nothing is installed, and the card cannot read anything from the phone. It only hands over a link.
Where does the link go?
That depends on how the card was set up. There are two common designs.
A direct link to Google. The card holds your Google write-a-review link, built around your Place ID. Google's developer page on Place IDs explains the code that identifies a listing. A tap opens the Google review form at once. This is simple, but you learn nothing about how often the card is used.
A link to a review page that leads on to Google. The card holds a link to a short page first. Smart Review Stand cards work this way. The customer sees a page with your logo and five stars. A rating of 4 or 5 stars opens your Google review form. A rating of 1 to 3 stars offers a short private note to you first, with a smaller link to Google below it.
The second design adds one step, and in return gives you a count of taps and ratings, and a chance to hear about a problem directly. It must never block anyone from reviewing. Google's prohibited and restricted content policy says a business may not discourage or prohibit negative reviews, or selectively solicit positive ones. Our article on what review gating is explains the difference.
Does the customer need a Google account?
To tap the card and open the page, no. To post a public Google review, the customer signs in to Google, as with any review. Most people are already signed in on their phone, so in practice the review form opens ready to use.
How is the link put on the card?
It is written to the chip with a phone or a small writer device. The process takes a few seconds per card. The same chip can usually be written again, unless it has been locked.
This matters in two situations:
- Your link changes. If your listing moves or is merged, the old link may stop working. A card that can be rewritten does not have to be thrown away.
- You already own cards. Smart Review Stand can rewrite an NFC card you already have, provided it is not locked. Our article on whether you can rewrite an NFC review card covers the details.
A card whose link points to a review page has a further advantage here. The page can be updated without touching the card at all.
Can you tell how often a card is used?
A chip cannot count its own taps. Counting happens on the page the link opens.
With a direct Google link, there is no count. You see new reviews arrive and nothing else.
With a review page in between, each visit can be counted. Smart Review Stand gives each card its own link, so the dashboard counts taps, ratings and reviews started per card. That tells you which spot in the shop works, and whether staff are pointing customers to the card. You can see the dashboard on the features page.
What can go wrong?
NFC is reliable, but a few things stop a tap from working.
- The phone is locked. Unlock it and try again.
- NFC is off. On Android, switch it on in the settings.
- The wrong part of the phone is used. Try the top edge, then the middle of the back.
- A thick or metal case is in the way. Cases with metal plates or card holders can block the signal.
- The card sits on metal. A metal counter or till surround directly under the card can weaken the signal. A stand or a non-metal mount fixes it.
- The phone has no NFC. Use the QR code.
- The link itself is wrong. If the page opens but is not your listing, the problem is the link and not the card.
When any of these happens in front of a customer, the answer is the same: "No problem, the code on the card does the same thing."
Is tapping a card safe for the customer?
A review card holds a web link and nothing more. It does not take payment, read contacts or install software. The phone shows the address and asks before opening it.
The sensible habit is the same as for any link: glance at the address in the prompt. A card set out on the counter of the business you are standing in is about as low a risk as a link can be. Owners should check their own cards now and then, to be sure nobody has stuck a different tag over them.
How do you use the card well?
The card removes the effort. It does not do the asking.
- Put it where the customer finishes. At the till, at reception, or on the table.
- Say one sentence. "If you have a minute, tapping this card takes you straight to our Google reviews." Our guide on how to ask for reviews in person has scripts.
- Ask every customer the same way. No rewards, and no choosing only the customers who seem pleased.
- Test it yourself each month. Tap it and check the page still opens your listing.
Google expects businesses to make the request easy. Its tips for getting more reviews mention sharing a link and a printed QR code in store.
What does it cost?
Smart Review Stand is $25 per month for one location, and a card is $15 once, so $40 in total to start with one card. The annual plan is $210 a year, which is 30% less than paying monthly, and includes 2 NFC cards. Details are on the pricing page.
What is the short version?
- The card holds a chip with one web link. It has no battery.
- A phone held close reads the link and asks to open it.
- No app is needed. The page opens in the browser.
- iPhone XS and newer, and most Android phones since 2015 with NFC on, can read it.
- The QR code on the card covers every other phone.
- A review page behind the link lets you count taps per card.
- The card makes reviewing easy. Staff still have to ask.