NFC Review Card Not Working? What to Check
NFC review card not working? Check the phone's NFC setting, where the phone is held, metal under the card and the link itself, in that order.
By Alan James, Founder, Smart Review Stand · Published · 9 min read
Dana, a week ago
Example“Quick to tap, and they fixed my order without any fuss.”
Reply from the owner
Thank you, Dana. We are glad it worked. See you next week.
When an NFC review card is not working, the cause is usually the phone or the placement, not the card. Check four things in order: that NFC is switched on and the screen is unlocked, that the phone is held in the right spot, that no metal or thick case is in the way, and that the link on the card still points to the right page. Most problems end at one of the first three. A card that truly has failed is rare, and a simple test with two different phones will tell you. This guide walks through each check and what to do about it.
What is the fastest way to find the problem?
Test with two phones, one iPhone and one Android if you can.
- Works on both. The card is fine. The problem was with one customer's phone or how it was held.
- Works on one. The card is fine. Look at the settings on the other phone.
- Works on neither. Look at the card's surroundings first, then the card.
- Opens, but shows the wrong page or an error. The chip is fine. The link is the problem.
This takes a minute and tells you which section below to read.
Is NFC switched on?
On an Android phone, this is the first thing to check.
Android's developer guide to NFC basics explains that Android looks for NFC tags only while the screen is unlocked and NFC is switched on. A customer who has turned NFC off, perhaps to save battery, will get no response at all.
NFC is normally found in the phone's settings under connections or connected devices. The exact menu varies by maker.
iPhones are simpler. iPhone XS and newer read a card without any setup. There is no NFC switch for a customer to turn off.
Is the screen awake and unlocked?
A phone in a pocket with a dark screen will not read a card.
On Android, as the guide above says, the screen must be unlocked. On an iPhone, the screen needs to be on. In both cases, the customer should wake the phone first and then tap.
A phone that is busy with something else can also miss a tap. If the camera is open, a payment screen is showing, or a call is in progress, close it and try again.
Is the phone held in the right place?
This is the cause staff see most often. The NFC reader is a small antenna in one part of the phone, and it has to be close to the card.
- iPhone. The reader is at the top edge. Hold the top of the phone to the card, as if pointing with it.
- Android. The reader is usually on the back, near the middle or near the camera. It differs by model.
Three habits help:
- Hold the phone almost touching the card. The range is very short.
- Hold it still for a second or two. A quick swipe past is not enough.
- If nothing happens, slide the phone slowly across the card until it responds.
Print a short line on the card or stand: "Hold the top of your phone here." It prevents most failed taps.
Is a phone case in the way?
Usually a case is no problem. A few are.
- Thick, rugged cases add distance between the reader and the card.
- Cases with metal plates, often for magnetic car mounts, can block the signal.
- Wallet cases that hold bank cards put other cards between the phone and yours.
If a customer's tap fails and the phone is in a heavy case, suggest the QR code. Do not ask a customer to take a case off.
Is there metal under or behind the card?
Metal close to an NFC card can weaken the signal. A card lying flat on a stainless steel counter, stuck to a metal till surround, or mounted on a metal door may read poorly or not at all.
The fixes are simple:
- Use a stand that lifts the card off the surface.
- Put something non-metal under it, such as a wooden block or an acrylic holder.
- Move it a short distance to a wooden or laminate surface.
If the card worked when it arrived and stopped when you moved it, look at what is underneath. Our guide on where to put review cards covers placement in more detail.
Does the phone tap but nothing opens?
Sometimes the phone does read the card, and the customer misses what happens next.
- On an iPhone, a notification appears at the top of the screen. The customer has to tap it to open the page. People often do not notice it.
- On Android, the page may open directly, or the phone may ask first. The NFC basics guide notes that beginning with Android 17, scanning a tag with a web link shows a prompt asking whether to open the link.
Tell staff what to expect, so they can say "tap the banner at the top" or "choose open" when a customer hesitates.
Does the card open the wrong page?
If the phone opens something, the chip works. The problem is the link stored on it.
Common cases:
- The link is out of date. The business moved, merged listings or changed its Google profile, and the old link no longer leads to the right place.
- The card was programmed with the wrong link in the first place.
- The page itself is down or the account behind it has lapsed.
Check the link on its own. Type or paste it into a browser on a computer. If it fails there too, the card is not at fault.
A card can often be rewritten with a new link, as long as it has not been locked. Our article on whether you can rewrite an NFC review card explains how. To make a fresh review link, use our free Google review link generator.
Does it work on some phones and not others?
That is normal, and it is not a fault.
iPhone XS and newer read the card without setup, and most Android phones made since 2015 do too when NFC is switched on. That leaves older phones, phones with NFC turned off, and a few budget models with no NFC at all.
This is why a review card should never rely on NFC alone. Every card needs a QR code as well. A customer whose tap fails can open the camera and scan. Our comparison of NFC and QR codes for reviews explains why the two belong together.
Could the card itself be damaged?
It can happen, though it is the least likely cause.
An NFC card has no battery. It is powered by the phone during the tap, so there is nothing to run flat. What can go wrong is physical:
- A sharp bend or crack can break the antenna inside.
- A hole punched or drilled through the card can cut it.
- Heat, such as a card left on a hot appliance, can damage the chip.
If the card fails on two phones, off metal, with NFC on and screens unlocked, it has probably been damaged. Replace it.
What if the QR code does not scan either?
The QR code has its own short list of problems.
- Glare. A glossy card under a spotlight reflects into the camera. Tilt it or move it.
- Low light. A camera needs to see the code.
- Damage. Scratches, stains or a sticker across part of the code.
- Size. A very small code is hard to scan from any distance.
- A broken link. As with NFC, if the code scans and the page is wrong, the link is the problem.
Google's help page on review links and QR codes explains how to copy your review link or save a QR code from your Business Profile, which gives you a known-good code to test against.
If you need a clean printed code, our free review sign maker makes a sign with your QR code that you can print and put beside the card.
What should staff say when a tap fails?
A failed tap is a small awkward moment. Staff can smooth it over with one line.
"No problem. Try holding the top of your phone right on the card for a second."
If that does not work:
"You can scan the code with your camera instead. It goes to the same place."
Do not let it become a technical conversation. Two tries, then the QR code. Never take the customer's phone to do it for them.
What is the quick checklist?
Work through this in order. Stop when the card works.
- Wake and unlock the phone.
- On Android, switch NFC on.
- Hold the right part of the phone to the card: top edge on iPhone, back on Android.
- Hold still, almost touching, for two seconds.
- Lift the card off any metal surface.
- Try a second phone.
- Check the link in a browser.
- Use the QR code, and replace the card if it fails on every phone.
For the background on how the technology works, see our guide on how NFC review cards work.
How does Smart Review Stand handle this?
Every Smart Review Stand card has both an NFC chip and a QR code, and no app is needed for either. Each card has its own link, and the dashboard counts taps, ratings and reviews started per card. If a card that usually gets taps suddenly shows none, you know to go and look at it.
Smart Review Stand can also rewrite an NFC card you already have, if it is not locked, so a wrong link does not mean a new card. Prices are on the pricing page, and you can reach us through the contact page if a card will not behave.
What is the short version?
- Most failed taps are caused by the phone or the placement, not the card.
- On Android, NFC must be on and the screen unlocked.
- Hold the top of an iPhone, or the back of an Android phone, to the card.
- Hold still and almost touching for a second or two.
- Keep the card off bare metal, and watch for thick or metal cases.
- If the wrong page opens, fix the link. The card can often be rewritten.
- Always offer the QR code as the second way in.