Skip to main content
Smart Review Stand

How Big Should a Printed Review QR Code Be?

A printed review QR code should be at least 2 cm wide for close scanning, and larger from a distance. See sizes for receipts, signs and windows.

By Alan James, Founder, Smart Review Stand · Published · 9 min read

A printed review QR code should be at least 2 cm (about 0.8 inch) wide when customers scan it from a hand's distance, and roughly one tenth of the scanning distance when they scan from further away. So a code on a counter card can be small, and a code in a shop window needs to be large. These figures are common rules of thumb, not standards we have verified, so the real test is to print one and scan it. This guide covers sizes for each kind of print, the margin, contrast, file quality, and how to test before you order a hundred copies.

Why does the size of a QR code matter?

Because a phone camera has to see each small square in the code clearly. If the squares are too small, too blurred or too far away, the camera sees a gray patch and nothing happens.

A customer will try for about three seconds. If the code does not scan in that time, most give up and do not try again. A code that is a little too large costs you nothing. A code that is a little too small costs you the review.

Google's help page on review links and QR codes explains how to get a QR code for your reviews from your Business Profile. It does not say how big to print it, and we will not pretend it does. The sizes in this guide are our suggestions.

What is the smallest size that works?

About 2 cm, or 0.8 inch, on each side, for a code held within arm's reach. Below that, older phones and poor light start to cause failures.

That minimum assumes:

  • A simple code. One made from a short link.
  • Good print quality. Sharp edges and solid black.
  • A flat, matte surface.
  • Reasonable light.

If any of those is missing, go larger. On a thermal receipt, which prints at a coarse resolution on thin paper, we suggest 2.5 to 3 cm.

How do you work out the size for a given distance?

Divide the scanning distance by ten. That is the usual rule of thumb, and it is a good starting point.

  • Scanned from 20 cm. A receipt or a card in the hand. 2 cm minimum.
  • Scanned from 50 cm. A stand on a counter. 5 cm.
  • Scanned from 1 meter. A sign on a wall beside a till. 10 cm.
  • Scanned from 2 meters. A poster across a waiting room. 20 cm.
  • Scanned from 3 meters. A window sign read from the pavement. 30 cm.

In inches, the same rule gives roughly 2 inches of code for every 20 inches of distance.

Think about where the customer will actually stand, not where you would like them to stand. A sign behind a counter is scanned from the customer's side of the counter, which may be more than a meter away.

What sizes suit common printed items?

Here are starting points. Treat them as our suggestions, and test each one.

  • Paper receipt. 2.5 to 3 cm. Place it at the bottom with a line of text above.
  • Business card or appointment card. 2 to 2.5 cm. It will dominate the back of the card, and that is fine.
  • Table tent or counter card. 4 to 6 cm.
  • Invoice or job sheet. 3 to 4 cm, in a corner with clear space around it.
  • Sticker on a bag or box. 3 to 4 cm.
  • A5 or half-letter counter sign. 6 to 8 cm.
  • A4 or letter wall poster. 10 to 12 cm.
  • Window sign. 20 to 30 cm, depending on how far back people stand.
  • Vehicle side. We do not recommend it. People cannot safely scan a moving van, and a parked one is usually scanned from too far away.

Our guide on where to put review cards covers placement, and our guide on a review request on receipts covers receipts in detail.

How much blank space does the code need?

A clear margin on all four sides, often called the quiet zone. The usual advice is a margin as wide as four of the small squares in the code. A simpler way to think of it: leave a plain border about one tenth of the code's width, and more if you have room.

Common mistakes:

  • Text pressed against the edge of the code.
  • A decorative frame that touches the code.
  • The code printed to the very edge of a sticker.
  • A patterned or photographic background behind the code.

The margin must be the same light color as the background of the code. A white code area on a dark poster needs the white to extend beyond the code itself.

Does a simpler code let you print smaller?

Yes. A QR code made from a short link has fewer, larger squares than one made from a long link. Larger squares are easier for a camera to read, so the code can be printed smaller or scanned from further away.

What this means in practice:

  • Use the shortest working link you have.
  • Do not add tracking text to the link unless you need it.
  • Compare two codes side by side. If one looks much denser, it will need more space.

Our free Google review link generator turns a Google Place ID into a write-a-review link and QR code. Our guide on how to make a Google review QR code walks through the options.

Which colors and finishes work best?

Black on white, on a matte surface. Everything else is a compromise.

  • Dark code on a light background. Always this way round. A light code on a dark background fails on some phones.
  • High contrast. Navy or dark green on white is fine. Yellow on white is not.
  • Matte paper or matte laminate. Gloss reflects ceiling lights straight into the camera.
  • No logo in the middle unless you test it. A logo covers part of the code. Some codes tolerate that and some do not.
  • Flat surfaces. A code wrapped around a cup or a pillar distorts.

If your brand colors are pale, keep the code itself black and use the brand color in the text and border around it.

How do you keep the print sharp?

Start with a large, clean file and never stretch a small one. A blurred code is the second most common failure after a small one.

  • Use a vector file where you can. SVG or PDF stays sharp at any size.
  • If you use an image, make it big. At least 1000 pixels wide for anything up to poster size.
  • Do not screenshot a code and enlarge it.
  • Do not let a design tool smooth the edges. The squares should have hard edges.
  • Check the proof at full size. Not on a screen at 30%.

Our free review sign maker creates printable artwork with your QR code already at a sensible size.

How do you test before you print a batch?

Print one copy at the real size, on the real material, and scan it in the real place. Ten minutes of testing saves a wasted print run.

  1. Print a single copy at 100% scale.
  2. Put it where it will live. On the counter, in the window, in the receipt printer.
  3. Stand where a customer will stand.
  4. Scan with an iPhone and an Android phone. Use the ordinary camera app.
  5. Try an older phone if you can borrow one.
  6. Try in the worst light of the day. Evening, or with the sun on the window.
  7. Check where the link lands. It should open the review form, not your profile.

If it takes more than two seconds on any phone, go up a size and test again.

What should you print beside the code?

One short line that says what the code does. A QR code with no label is a mystery, and people do not scan mysteries.

Good labels:

  • "Scan to leave us a Google review."
  • "How did we do? Scan to tell us."
  • "Point your camera here to review us on Google."

Keep the label in a readable size. If the customer can read the text, they are close enough to scan the code.

Follow the rules in what you print. Google's prohibited and restricted content policy does not allow incentives for reviews, and it says a business may not selectively solicit positive reviews. So no "scan for 10% off", and no "happy? scan here". Our guide on leaving reviews through QR codes versus NFC compares the two ways of opening the link.

Google's tips for getting more reviews mention receipts and a printed code shown in store as places to ask.

When is an NFC card a better choice than a bigger code?

When there is no room for a large code, or when the light is poor. A tap does not depend on size, contrast or glare.

Every Smart Review Stand card has both: an NFC chip and a printed QR code. iPhone XS and newer read the card without setup, and most Android phones made since 2015 do too when NFC is switched on. Customers whose phones do not tap can scan the code. No app is needed.

How does Smart Review Stand fit in?

Smart Review Stand supplies cards with the QR code already printed at a size that scans from a counter. A customer taps or scans and sees a page with your logo and five stars. A rating of 4 or 5 stars opens your Google review form. A rating of 1 to 3 stars offers a short private note to you first, with a smaller link to Google below it.

Smart Review Stand is $25 per month for one location, and a card is $15 once, so $40 in total to start with one card. The annual plan is $210 a year, which is 30% less than paying monthly, and includes 2 NFC cards. Details are on the pricing page.

What is the short version?

  • Print a review QR code at least 2 cm wide for close scanning.
  • For longer distances, make the code about one tenth of the scanning distance.
  • Leave a clear, plain margin on all four sides.
  • Use a short link, because a simpler code scans more easily.
  • Print dark on light, on a matte surface, from a sharp file.
  • Add one line of text saying what the code does.
  • Print one copy and test it with two phones before ordering a batch.

Common questions

About 2 cm, or 0.8 inch, on each side for a code scanned from a hand's distance. That is a common rule of thumb, not a guarantee, so print a test and scan it with two different phones.

A common rule of thumb is one tenth of the scanning distance. A code read from 1 meter away should be about 10 cm wide. A code read from 3 meters should be about 30 cm.

Yes. Leave a clear, plain margin on all four sides, often called the quiet zone. Text, logos or the edge of the paper pressed against the code are a common cause of failed scans.

The usual causes are a code printed too small, low contrast, no clear margin, a glossy surface that reflects light, or a blurry image that was stretched from a small file.

Put a card on the counter this week.

Setup takes about ten minutes, and you can test your rating page before any card arrives.

14 days free. No payment details needed. No contract, cancel any time.

Start your 14-day free trial

We store your theme and sign-in on this device. With your permission we also load Google reCAPTCHA and anonymous usage statistics. Cookie policy.